dpa series ? 16 pin dip ssr ? ratings to 1a @ 280 vac ? scr output ? voltage or current-control input ? zero-crossin g ( resistive loads ) out p ut product selection control voltage 3.5-10 vdc dpa4119 dpa6119 10-35 ma DPA4111 dpa6111 available options output specifications (1) description operating voltage (47-63hz) [vrms] 20-140 20-280 transient overvoltage [vpk] 400 600 maximum off-state leakage current @ rated voltage [marms] 0.01 0.01 minimum off-state dv/dt @ maximum rated voltage [v/sec] (3) 500 500 maximum load current [arms] 1.0 1.0 minimum load current [arms] 0.025 0.025 maximum surge current (16.6ms) [apk] 30 30 maximum on-state voltage drop @ rated current [vpk] 1.2 1.2 minimum power factor (with maximum load) 0.5 0.5 input specifications (1) description control voltage range - 3.5-10 vdc control current range 10-35 ma - must turn off-state current 1.0 ma - must turn off-state voltage - 1.0 vdc typical input current @ 5 vdc - 15 madc nominal input impedance - 270 ohm maximum turn-on time [msec] 1/2 cycle 1/2 cycle maximum turn-off time [msec] 1/2 cycle 1/2 cycle
general specifications description parameters dielectric strength, inpu t/output/base (50/60hz)(2) 3750 vrms minimum insulation resistance (@ 500 vdc)(2) 10 9 ohm maximum capacitance, input/output 2.0 pf ambient operating temperature range -30 to 80c ambient storage temperature range -30 to 125c weight (typical) 0.1 oz. (2.9g) encapsulation thermally conductive epoxy general notes 1) all p ara meters at 25 c u nl ess othe rwise speci fi ed. 2) di ele ctric an d ins ula ti on re sistan ce a re me asu red b etwe en i np ut and ou tp ut 3) off-sta te dv/dt te st m etho d pe r eia/nar m stan da rd rs mechanical specifications pin 8: ac load pin 10: ac load pin 16: +d c control pin 1: -dc control thermal derate information agency approvals ul e1 16 95 0 csa l r81 68 9 120210
wiring diagram annex - enviromental information
|